Supplies and Materials
Cardstock and a variety of decorative papers in shades of green
Downloadable templates “St. Patrick’s Day Card 1” and “St. Patrick’s Day Card 2”
Chipboard (can be scrap – for making templates)
Small circle punch
Paper flower embellishments
Craft knife and blades (X-Acto or something similar)
Rubber stamps (St. Patrick’s Day, appropriate greeting, Celtic designs, spirals)
Stamping ink pads and re-inkers in the following colors: dark brown, shades of green
Acrylic stamp mounting blocks
Awl or needle tool
Small hole punch
Optional – buttons, white craft glue such as Turbo Tacky Glue, needle, thread
The first part of the process for the pair of cards is to stamp out St. Patrick’s Day and Celtic motifs onto small pieces of scrap paper. Use stamping inks in various shades of green and dark brown. Mix in some neutrals if you want. You can make the backgrounds more interesting with the use of background stamps or techniques such as brayering.
Once you have a quantity of stamped pieces finished and the ink is dry, gather them together with some scraps of paper in various shades of green. Make a collage by gluing these scraps down with a glue stick onto a 1/2 sheet of white cardstock. You can create interest by cutting the scraps into smaller pieces by tearing while using a ruler as a straight edge or by cutting apart with decorative scissors. Burnish your collage periodically with a bone folder under a piece of clean scrap paper so the glue has a nice tight seal. Set aside for now and let the glue dry.
Directions for St. Patrick’s Day Card #1
1. Download and print out the template “St. Patrick’s Day Card #1”.
2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card. Score it and fold it in half.
2. Trace the shamrock from the template onto the back of dark green decorative paper. Cut out the shamrock with scissors. If you want to make several cards, you can trace the shamrock onto chipboard and cut it out to use multiple times for tracing.
3. Trace the half-leaf shape onto chipboard and cut out. Trace onto four different pieces of decorative paper in different shades of green. Instead of pre-made decorative paper you can use some parts of your collage if you want (if you do this be sure to leave at least a 3 7/8″ x 5 1/8″ sized piece intact to use on card #2). Glue the half petals in place as shown on the card sketch in the PDF file.
4. Cut out a narrow strip (3/4″ wide) of light colored paper and stamp or glue a sentiment onto it. Glue this onto a slightly wider (1″ wide) paper strip. Glue to front of card and trim.
5. Glue the shamrock down in place on the front of the card.
6. Punch out a flower shape with a punch and glue down in center of shamrock.
7. Punch out a small circle and glue in place on the strip near the bottom of the card.
8. Punch two holes for eyelets in the center of where the two flower embellishments will go. You can use a small hole punch or a needle tool or awl to start the hole. If the hole is not large enough to accept the eyelet you can enlarge the hole with paintbrush handle or other handy tool.
9. Push the eyelets through the holes and set with the eyelet setter.
Variation – use buttons as embellishments instead of the paper flowers. Attach by gluing with white craft glue then further secure by sewing.
Directions for St. Patrick’s Day Card #2
1. Download and print out the template “St. Patrick’s Day Card #2”.
2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card, score it, and fold it in half.
3. Cut out a 3.75 x 5″ size piece of dark green cardstock.
4. Trace the shamrock from the template onto the back of the dark green cardstock. Cut out the shamrock with a craft knife. If you cut carefully, you can use the cutout to make another card. If you want to make several cards, you can save your first cutout and use it multiple times for tracing.
5. Get your collage out and cut a 3 7/8″ x 5 1/8″ size piece out of it. Position your dark green cutout piece over it and place those on top of your folded cardstock card base. Make sure the three layers line up correctly. If you decide you want a sentiment or other embellishment in the lower left area where there is some space, now would be a good time to add it.
6. Using the printed out template as a guide, poke holes in all three layers with an awl or needle tool.
7. Push decorative brads through the holes and spread prongs on the back side. You’re done!
Some of the rubber stamps and papers I used in this project are by 7gypsies by Canvas Corp Brands and Inkadinkado. The “Good Luck” stamp is by Carolyn Hasenfratz Design and the celtic and spiral stamps are hand carved by me.
If you would like to make envelopes for these cards here is a template that will fit:
Extra tip: If you have heart punches or stencils, you can make a three or four leaf clovers for yet more cards from three or four heart shapes!