Easter Card Tutorial

Easter card with rubber stamped and stenciled decoration
Easter card with rubber stamped and stenciled decoration

Here is a project that will help you use up some paper scraps!

Tools and Supplies
Scissors
Decorative paper scraps in pastel and spring colors
Pencil
Paper cutter
Corner rounder
Cardstock
Scoring tool
Folding tool
Masking tape (low-tack type is best)
Sponges
Stencils with interesting background textures
Rubber stamps, including small letter stamps
Rubber stamping ink – black and assorted colors
Heat tool (optional)
Clean scrap paper
Glue stick
Small hole punch
Eyelets
Eyelet setter
Hammer

Instructions

  1. Draw an egg shape 1 3/4″ tall on the back of decorative paper. If you have a die cut, punch or stencil that is around that size you can use that. Cut out egg. If you need inspiration for color schemes, scroll down to the bottom of this article for more samples.
  2. Cut some thin strips out of a contrasting paper and glue them on the front of the egg. Trim the stripes around the edge of the egg shape with scissors.
  3. Cut out a piece of paper 2 1/4 x 2 1/4″ for a background to the egg. Round the corners with a corner rounder. Stamp a textural stamp on part of of the square. In my sample I used a stamp from 7gypsies. Make sure the ink is dry, use a heat tool if necessary to speed it up. Glue the egg onto the square.
  4. Cut an 8 1/2″ x 4 1/4″ inch piece from cardstock for the body of the card. Score down the middle and fold in half.
  5. On the front of the card, sponge some rubber stamping ink in complementary colors through some interesting background stencils. For my samples I used stencils from The Crafters Workshop. Hold the stencil and card in place with masking tape on your work surface if necessary while working.
  6. When ink is dry, stamp a textural rubber stamp along the top and bottom edges in a complementary color of your choice. In my sample I used a stamp from 7gypsies.
  7. Glue the square with the egg on it to the middle of the front of the card.
  8. Stamp two large brackets on either side of the square in black. I used stamps from the set “Memory Craft Helpers” from Carolyn’s Stamp Store.
  9. Cut two strips of paper 3/8″ x 4.25″. Using black ink stamp the word “Happy” in the center of one and “Easter” on the other. I used a stamp set with interchangeable letters to form the words. Randomly stamp a design in black here and there on one or both of the strips. For my samples I used a stamp from 7gypsies that looks like ledger paper. Glue the two strips in place above and below the square with the egg on it.
  10. Punch four holes in the ends of the paper strips and insert an complementary color eyelet in each. Set the eyelets.
  11. You’re done! If you want to make a matching envelope for the card, the free downloadable template “Square Envelope Template” will fit.
Easter cards in a variety of color schemes
Easter cards in a variety of color schemes

Leave a Reply

Your email address will not be published. Required fields are marked *