Tag Archives: #canvascorpbrands

Give Your Mason Jar Gifts a Beachy Look

Handmade candle in a Mason jar, decorated with collage papers and a handmade tag.
Handmade candle in a Mason jar, decorated with collage papers and a handmade tag.

My tutorial on decorating the lids and making tags for seaglass-colored Mason jar candles has been published on the Canvas Corp Brands blog.

Read More

To learn how I made the candles, you can read my tutorial on the Schnarr’s Hardware blog:
Make Old Wax Candles Into New Candles

Schnarr’s Hardware sells several sizes and shapes of Mason jars as well as lids and other canning accessories.

Decorate a Bookmark With Paper, Fabric and Buttons

Bookmark made from paper, fabric and buttonsMy bookmark tutorial has been posted on the Canvas Corp Brands Blog. I included a free downloadable PDF template with my tutorial. Enjoy!

Read more:

My Entry for the Canvas Corp Brands January Challenge

I’m still new to the Canvas Corp Brands Creative Crew so I didn’t handle the entry process for the January challenge quite right and it’s not on their web page. But that’s ok, I’ll just put my entry here on my blog. The challenge was to make a project based on the prompt “Be Lazy” or “Be Lacy”. I decided to do a couple of scrapbook pages about kayaking for my contribution. Kayaking is often strenuous but there are opportunities for lazy moments when you float around on a lake eating a picnic lunch or let yourself drift downstream for awhile on a river. Almost every time I go floating I take a “foot selfie” to remind myself of how chilled out and relaxed I am on water. It makes the effort of transporting the kayak well worth it!

2 page scrapbook layout of kayaking outings from last summer.
Simple two-page scrapbook layout of kayaking outings from last summer. My fiance Tom is featured on the left hand page, my friend Jodie on the right.

I do some of my scrapbooking in a memory planner. The pages shown here are 8 1/2 by 5 1/2 inches to fit within the memory planner format I’m currently using. I have a current planner that I carry around with me, and after the pages get used I transfer them to an “archive” volume. I periodically go back and scrapbook photo pages into the “archive” volume as I get time if I didn’t complete them while the pages were current. I use 7gypsies binding rings to assemble the archive volumes because it’s easy to open and close them and add pages as I get them done.

The papers I used in this project include some selections from the 7gypsies Architextures collection and the Canvas Corp Natural Nautical collection. I enhanced the papers with some Tim Holtz design tape, a couple of brads and a couple of sequins.

Here is where you can see the other challenge entries:

Make St. Patrick’s Day Cards

St. Patrick's Day Cards
Everyone is Irish on St. Patrick’s Day! Wish good luck and celebrate spring by making St. Patrick’s Day Cards!

Supplies and Materials
Cardstock and a variety of decorative papers in shades of green
Downloadable templates “St. Patrick’s Day Card 1” and “St. Patrick’s Day Card 2”
Scoring tool
Tracing paper
Chipboard (can be scrap – for making templates)
Flower punch
Small circle punch
Paper flower embellishments
Eyelet setter
Metal ruler
Craft knife and blades (X-Acto or something similar)
Cutting mat
Rubber stamps (St. Patrick’s Day, appropriate greeting, Celtic designs, spirals)
Stamping ink pads and re-inkers in the following colors: dark brown, shades of green
Acrylic stamp mounting blocks
Double-sided tape
Paper cutter
Awl or needle tool
Small hole punch
Decorative scissors
Glue stick
Masking tape
Decorative brads
Optional – buttons, white craft glue such as Turbo Tacky Glue, needle, thread

The first part of the process for the pair of cards is to stamp out St. Patrick’s Day and Celtic motifs onto small pieces of scrap paper. Use stamping inks in various shades of green and dark brown. Mix in some neutrals if you want. You can make the backgrounds more interesting with the use of background stamps or techniques such as brayering.

Once you have a quantity of stamped pieces finished and the ink is dry, gather them together with some scraps of paper in various shades of green. Make a collage by gluing these scraps down with a glue stick onto a 1/2 sheet of white cardstock. You can create interest by cutting the scraps into smaller pieces by tearing while using a ruler as a straight edge or by cutting apart with decorative scissors. Burnish your collage periodically with a bone folder under a piece of clean scrap paper so the glue has a nice tight seal. Set aside for now and let the glue dry.

Collage made with scrap paper and paper pieces that I stamped with rubber stamps.
Collage made with scrap paper and paper pieces that I stamped with rubber stamps.

Directions for St. Patrick’s Day Card #1

St. Patrick's Day Greeting Card

1. Download and print out the template “St. Patrick’s Day Card #1”.

2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card. Score it  and fold it in half.

2. Trace the shamrock from the template onto the back of dark green decorative paper. Cut out the shamrock with scissors. If you want to make several cards, you can trace the shamrock onto chipboard and cut it out to use multiple times for tracing.

3. Trace the half-leaf shape onto chipboard and cut out. Trace onto four different pieces of decorative paper in different shades of green. Instead of pre-made decorative paper you can use some parts of your collage if you want (if you do this be sure to leave at least a 3 7/8″ x 5 1/8″ sized piece intact to use on card #2). Glue the half petals in place as shown on the card sketch in the PDF file.

4. Cut out a narrow strip (3/4″ wide) of light colored paper and stamp or glue a sentiment onto it. Glue this onto a slightly wider (1″ wide) paper strip. Glue to front of card and trim.

5. Glue the shamrock down in place on the front of the card.

6. Punch out a flower shape with a punch and glue down in center of shamrock.

7. Punch out a small circle and glue in place on the strip near the bottom of the card.

8. Punch two holes for eyelets in the center of where the two flower embellishments will go. You can use a small hole punch or a needle tool or awl to start the hole. If the hole is not large enough to accept the eyelet you can enlarge the hole with paintbrush handle or other handy tool.

9. Push the eyelets through the holes and set with the eyelet setter.

Variation – use buttons as embellishments instead of the paper flowers. Attach by gluing with white craft glue then further secure by sewing.

Directions for St. Patrick’s Day Card #2

St. Patrick's Day Greeting Card

1. Download and print out the template “St. Patrick’s Day Card #2”.

2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card, score it, and fold it in half.

3. Cut out a 3.75 x 5″ size piece of dark green cardstock.

4. Trace the shamrock from the template onto the back of the dark green cardstock. Cut out the shamrock with a craft knife. If you cut carefully, you can use the cutout to make another card. If you want to make several cards, you can save your first cutout and use it multiple times for tracing.

5. Get your collage out and cut a 3 7/8″ x 5 1/8″ size piece out of it. Position your dark green cutout piece over it and place those on top of your folded cardstock card base. Make sure the three layers line up correctly. If you decide you want a sentiment or other embellishment in the lower left area where there is some space, now would be a good time to add it.

6. Using the printed out template as a guide, poke holes in all three layers with an awl or needle tool.

7. Push decorative brads through the holes and spread prongs on the back side. You’re done!

Some of the rubber stamps and papers I used in this project are by 7gypsies by Canvas Corp Brands and Inkadinkado. The “Good Luck” stamp is by Carolyn Hasenfratz Design and the celtic and spiral stamps are hand carved by me.

If you would like to make envelopes for these cards here is a template that will fit:

Extra tip: If you have heart punches or stencils, you can make a three or four leaf clovers for yet more cards from three or four heart shapes!

See my Pinterest site and past lesson plans for ideas and craft projects.

Finally Finished My New Year Cards!

For many years I’ve responded to Christmas Cards by sending out New Year cards – I explained why I do that in this previous blog post: Why I Send New Year Cards Instead of Christmas Cards.

I started this year’s design by collaging small pieces of paper onto scrap paper strips that were about 3/4 to 1 1/4 inches wide. I began with the numbers “2018” which I cut from the 7gypsies papers Paddington Blackfriars and American Vintage: 12×12 State Plates Paper. I filled in the paper strips with assorted scrap papers from my small scrap box.

Next I rubbed on some images from the set Architextures™ Parchment Rub-On – Build which were a good fit for my chosen theme “Let’s build a great 2018!”. I added a bit of Tim Holtz paper tape.

I trimmed my strips with scissors to make the edges as even a possible then I scanned them and used Adobe Photoshop software to refine my trimming job and arranged some of the strips into a rectangular digital collage for the front of the card. I made a selection outline of all the areas with the year numbers and turned up the contrast so that they would stand out more. I added some grid designs and hardware looking graphics using Adobe Illustrator then I saved a PDF file of my cards to take to the printer.

While I was working on the collages for my New Year card, I also completed a project for Canvas Corp Brands. I’ve been selected for the 2018 CCB Creative Crew , the design team that makes samples and comes up with projects for Canvas Corp Brands products. Our first challenge was to decorate a 4 x 4 inch canvas in a way that highlights our personal style.

To create the above decorated mixed media canvas I cut three of my collage strips to fit the 4 x 4 inch stretched canvas from Canvas Corp.

I squirted some StazOn Timber Brown permanent rubber stamping ink onto an old food lid to use as a palette. I used the side of an eraser to print a line of Timber Brown along the edges of each collage strip.

I painted my canvas with yellow acrylic paint and allowed it to dry.

Then I applied Tattered Angels Color Wash paint in Rose Gold with a brush along the sides and around the edges of the canvas.

To finish my canvas, I glued the collage strips to the front with Turbo Tacky Glue and nailed tiny tacks into the corners of each paper piece. All done!