Tag Archives: glue stick

Upcycle the front of a used greeting card

Finished cards made by cutting up old Christmas cards

I’ve been working on a series of projects designed to challenge myself to see how many different ways I could upcycle old holiday cards. Usually there is a nice picture on the front, and a sentiment on the inside. Here is how to make a new card out of an old one by recycling the re-usable parts and adding a bit of your own creativity with a little metallic paint, glitter, and rubber stamping ink.

Tools and Materials

Old holiday cards
Templates – Small Rectangular Card #1 or Small Rectangular Card #2
Paper cutter
Scissors
Utility knife
Self-healing cutting mat
Metal ruler
Solid color card stock
Old food lid
Eraser with sharp corners designated for stamping
Clean scrap paper
Metallic acrylic paint
Acrylic medium
Glitter
Glue for glitter
Glue stick
Rubber stamps for corner decoration
Black permanent rubber stamp ink
Optional – heat tool

Instructions

Templates for two sizes of rectangular greeting cards. This image is smaller than actual size. To download the originals, click on Small Rectangular Card #1 (5.25 x 4 inches) or Small Rectangular Card #2 (3.5 x 2.75 inches).

Download and print out one or both the two card templates, Small Rectangular Card #1 or Small Rectangular Card #2. They will help you visualize what size parts to prepare and how to put them together.

Go through some old holiday cards and cut the pictures out of the front of the card, either the 3.5 x 4.75 inch size or the 3.5 x 2.75 inch size. It’s very efficient to make several at a time.

I added metallic paint to the edges of some of my cut out images, and glitter to others. An easy way to apply paint to a straight edge is to squirt some paint onto an old food lid, or other temporary palette. Cover your work surface with scrap paper. Take an eraser with flat sides and sharp edges and dip it in the paint. Stamp a straight line of paint onto the edges of the images. I reserve an eraser for this use because I use this manner of application a lot for acrylic paint and various inks.

While the paint is drying, you might like to edge more of the images with glitter. Squeeze or brush glue around the edge, then apply the glitter and let dry. I made selections from my own glitter stash more interesting by mixing sizes and shapes of glitter particles and adding at least one opalescent color to each blend.

Glitter blends that I mixed up for a variety of Christmas projects.

If you ever need to speed up the drying of paint or glue at any stage for easier handling, you can dry the pieces with a crafting heat tool.

Cut out images edged with metallic paint and glitter.

For each image, cut a piece of cardstock in the size of an unfolded card, and fold it in half. Using a self-healing cutting mat, a utility knife, and a metal ruler, cut a slit in each corner as indicated on the template. It isn’t necessary to draw the lines on the card before cutting – as long as the cuts are close to the right size and placement they should work.

Next insert the images into the fronts of the folded cards by tucking the corners into the slits.

Stamping the corners.

I thought the corners needed to have a bit more interest to them, so I stamped each corner in a mix of acrylic medium with a touch of metallic paint and glitter to add a little shimmer. Then when that addition was dry, I over stamped some decorative stamp dessigns in black permanent ink.

Gluing a sentiment into the inside of each card that I cut from another card.

The last step to finish the cards was to glue a sentiment that I cut from another card into the inside of the card with a glue stick.

You’re done!