Tag Archives: sewing felt

The upside to forced inactivity – more time to sew!

In the fall, I’d rather be spending my weekends camping, hiking, or working in the garden. But because of the recent sprain/break of my foot (x-rays inconclusive), I have to keep my foot elevated most of the day and limit walking. One thing that has helped me keep calm during this frustrating time is sewing! Check out these recently completed projects.

For the triangle pillow, I combined recycled t-shirt fabric (used on the back), upcycled corduroy, a recycled jeans pocket and new flannel fabric to make a pocket pillow that my husband Tom and I gave to our great-nephew. For the pattern, I used a commercial beginner pattern and added a strip across the front to make a bigger pocket to accommodate the stuffed gnome/elf that my husband bought. The finished pillow has two functional pockets.

In the middle is a throw pillow that I made for our cat Leo. I’ve been thinking about making something like this for him since our other cat, Griffin, died in February. They were together for over 20 years and Leo seems lonely sometimes. I don’t know if it really helps him or not, but it turned out cute enough to use as a throw pillow as well. I used upcycled upholstery fabric from a chair that matched our sofa that we are replacing due to wear and other things (Leo was pretty destructive to the chair – perhaps because of frustration or loneliness or both).

I made the cat with a commercial pattern that my Mom used in the early 1980s. The pattern includes six animals and I hope to make more soon. I drew a new face for the embroidery on the cat to give it more attitude than the face design in the original pattern.

I started the felt stocking a few years ago as a sample for one of the classes I was teaching at JoAnn fabrics and crafts. If I ever teach there again, it might be a long time. So I decided to take the extra parts I made and sew this stocking up to finish it. When making my samples for teaching, I typically cut out enough parts to make several so that I could demonstrate the steps for the students during the class. If the classes were popular, I would often teach multiple sessions. When making the samples there was no way to know how many times I’d end up teaching it. The original project had more gluing and less sewing since it was for kids. I used all sewing and no glue this time since it’s unlikely I’ll teach this class again and I no longer have to stick to the project directions exactly. This sure was fun to stitch!

The stocking is now listed for sale on Etsy. Here is the link:

Felt Christmas Stocking With Hand Sewn Applique – Blue and Green

Fall Table Runner with Wired Burlap Ribbon

Fall table runner with felt appliqué leaves
Fall table runner with felt appliqué leaves, enhanced with embroidery thread, sequins and beads

This project is inspired by memories of sewing kits that I used to work on when I was a kid. I remember one kit in particular was a calendar printed on burlap with certain areas of the design accented with sequins attached by running thread through seed beads. Here is an original design of mine that reminds me of all that fun!

Tools and Materials

Fall leaves
Scissors
Scrap paper
Heavy books
Marker
Scrap chipboard
Fabric scissors
Ball point pen
Masking tape
Wide burlap ribbon with metallic threads in it – about 9 inches wide
Harvest gold color wired burlap-look ribbon – 1 1/2 inches wide
Felt in a assorted fall leaf colors
Washable fabric marking pen
Gold metallic embroidery thread – six strand
Embroidery thread in off white, rust and dark brown
Assorted size sequins in fall and earthy colors such as ochre, brown, bronze, copper and gold
Copper or bronze colored seed beads – select ones with holes big enough for a threaded needle to pass through twice
Scrap fabric in a rustic color for the ends
Needles – tapestry and embroidery

Directions

Chipboard leaves made as templates
Chipboard leaves made as templates. Leaf veins were drawn on for future reference in designs.

Walk around your neighborhood and collect leaves to use as templates. Choose leaves more for their shape than their color – you want ones that will flatten easily and are roughly the size of your hand and smaller.

Place your leaves on a hard surface like a table between pieces of scrap paper. Stack books or other flat heavy objects on top and allow to sit for several hours to press leaves for easier handling.

Place leaves on scrap chipboard and trace around with marker. Loosely draw where the leaf veins are on the cardboard for future reference. Discard leaves in the compost if you don’t want them for another project. Cut out the chipboard leaves.

Cut a piece of wide burap ribbon the length that you want for your table runner, plus about 4 extra inches for hemming. Before cutting, tape a piece of masking tape just inside where you plan to cut. The tape will help keep the ends of the ribbon from unraveling.

Pin down the hems on the ends but don’t sew yet.

Fold wired burlap ribbon lengthwise and pin along the long sides of the ribbon.

Use tapestry needle and full thickness of the gold embroidery thread to sew the ribbon in place with a running stitch just inside the wired edge.

Trace around the chipboard leaf shapes with a ball point pen on the backs of various colors of felt. Cut out leaf shapes.

Place felt leaves on your runner in an arrangement that you like. Pin in place.

Split lengths of the six-strand gold embroidery thread lengthwise into pieces with three strands each. Use the three-strand pieces to sew a running stitch along the edges of the felt leaves, attaching them to the wide burlap ribbon.

Stitch leaf vein marks using a running stitch with the various embroidery thread colors. For example try rust color thread for the veins on the light brown felt, off-white thread for the ochre felt and dark brown for the gold and orange felt. If it helps to figure out where to sew the leaf veins, refer back to your chipboard leaves and draw the veins on the felt with the washable fabric marker. After you’re done sewing on the leaf viens, dab any washable marker marks that show with a damp cloth to get rid of them.

Accent the leaves with a few scattered sequins on each nestled among the embroidered leaf veins in a manner that suggests the spots and color variations that you find on natural fallen leaves. Hold the sequins on by bringing a thread from the back through a bead, around the side of the bead then back down through the sequin. Go back through each bead at least twice for durability. Sew a few beads by themselves among the sequins.

Pin and fold strips of fabric to the ends to cover up the raw edge of the ribbon. Sew in place with the metallic embroidery thread.

When the fall season is over, store your table runner rolled up so that the wire in the ribbon does not kink.

Heisenberg Pillow

Heisenberg pillow inspired by Breaking Bad
Heisenberg pillow inspired by Breaking Bad

A therapist recently suggested the use of a talking globe for family discussions. This reminded me of the family intervention scene with the talking pillow in the TV show Breaking Bad. In my immediate family we are all fans of the show and I thought it would be funny to make a talking pillow and have a portrait of the main character Walter White aka Heisenberg on it. That should create a more convivial atmosphere for us. I feel a little silly making fan art at my age but if I call it Pop Art it’s more legit, right?

I traced a drawing of the character at the size I wanted onto translucent tracing paper. I decided to applique felt onto the dark hat and sunglasses areas so I used my tracing to make additional outlines for the hat and glasses on scrap paper. I pinned the scrap paper to the felt and cut the shapes out. Another method for transferring a shape design to felt is to make a chipboard template and trace around it with a ball point pen or graphite pencil for light colors or a light colored chalk pencil for dark felt colors.

Next I cut out two square pieces for the front and back of the pillow from scrap knit white fabric with a texture to it that was suggestive of cross stitch backing fabric. I ironed fusible webbing onto the backs of each piece because stretchy fabric like this knit is sometimes hard to keep square.

I pinned my tracing to the front of the pillow and fastened my felt pieces in place over the sunglasses and hat areas. I stitched the felt pieces around the edges with black embroidery thread to hold the applied pieces in place. I then stitched the rest of the design with two different weights of embroidery thread through the tracing paper. When I was finished stitching I carefully tore the tracing paper away. In places where the stitching was close together I used a pair of tweezers to tear out some small remaining tracing paper bits.

I pinned the pillow halves together with the good sides facing out since I was not planning to turn the pillow inside out. I stitched the halves together with more of the black embroidery thread leaving a gap at the bottom edge for stuffing. I stuffed he pillow with fiberfill then sewed the gap shut. The last step to finish the pillow was to trim the raw fabric edges with pinking shears.