Tag Archives: embroidery thread

Fall Table Runner with Wired Burlap Ribbon

Fall table runner with felt appliqué leaves
Fall table runner with felt appliqué leaves, enhanced with embroidery thread, sequins and beads

This project is inspired by memories of sewing kits that I used to work on when I was a kid. I remember one kit in particular was a calendar printed on burlap with certain areas of the design accented with sequins attached by running thread through seed beads. Here is an original design of mine that reminds me of all that fun!

Tools and Materials

Fall leaves
Scissors
Scrap paper
Heavy books
Marker
Scrap chipboard
Fabric scissors
Ball point pen
Masking tape
Wide burlap ribbon with metallic threads in it – about 9 inches wide
Harvest gold color wired burlap-look ribbon – 1 1/2 inches wide
Felt in a assorted fall leaf colors
Washable fabric marking pen
Gold metallic embroidery thread – six strand
Embroidery thread in off white, rust and dark brown
Assorted size sequins in fall and earthy colors such as ochre, brown, bronze, copper and gold
Copper or bronze colored seed beads – select ones with holes big enough for a threaded needle to pass through twice
Scrap fabric in a rustic color for the ends
Needles – tapestry and embroidery

Directions

Chipboard leaves made as templates
Chipboard leaves made as templates. Leaf veins were drawn on for future reference in designs.

Walk around your neighborhood and collect leaves to use as templates. Choose leaves more for their shape than their color – you want ones that will flatten easily and are roughly the size of your hand and smaller.

Place your leaves on a hard surface like a table between pieces of scrap paper. Stack books or other flat heavy objects on top and allow to sit for several hours to press leaves for easier handling.

Place leaves on scrap chipboard and trace around with marker. Loosely draw where the leaf veins are on the cardboard for future reference. Discard leaves in the compost if you don’t want them for another project. Cut out the chipboard leaves.

Cut a piece of wide burap ribbon the length that you want for your table runner, plus about 4 extra inches for hemming. Before cutting, tape a piece of masking tape just inside where you plan to cut. The tape will help keep the ends of the ribbon from unraveling.

Pin down the hems on the ends but don’t sew yet.

Fold wired burlap ribbon lengthwise and pin along the long sides of the ribbon.

Use tapestry needle and full thickness of the gold embroidery thread to sew the ribbon in place with a running stitch just inside the wired edge.

Trace around the chipboard leaf shapes with a ball point pen on the backs of various colors of felt. Cut out leaf shapes.

Place felt leaves on your runner in an arrangement that you like. Pin in place.

Split lengths of the six-strand gold embroidery thread lengthwise into pieces with three strands each. Use the three-strand pieces to sew a running stitch along the edges of the felt leaves, attaching them to the wide burlap ribbon.

Stitch leaf vein marks using a running stitch with the various embroidery thread colors. For example try rust color thread for the veins on the light brown felt, off-white thread for the ochre felt and dark brown for the gold and orange felt. If it helps to figure out where to sew the leaf veins, refer back to your chipboard leaves and draw the veins on the felt with the washable fabric marker. After you’re done sewing on the leaf viens, dab any washable marker marks that show with a damp cloth to get rid of them.

Accent the leaves with a few scattered sequins on each nestled among the embroidered leaf veins in a manner that suggests the spots and color variations that you find on natural fallen leaves. Hold the sequins on by bringing a thread from the back through a bead, around the side of the bead then back down through the sequin. Go back through each bead at least twice for durability. Sew a few beads by themselves among the sequins.

Pin and fold strips of fabric to the ends to cover up the raw edge of the ribbon. Sew in place with the metallic embroidery thread.

When the fall season is over, store your table runner rolled up so that the wire in the ribbon does not kink.

On my work table right now: cuff bracelet prototypes

I’ve been working on some prototypes for cuff bracelets made from upcycled fabric, ribbon and faux leather. I’ve had a lot of fun stitching ribbon to tubes made of fabric and pieces of faux leather. I’m embellishing some with beads and buttons. My next step will be working out how to finish the backs and attach snap fasteners. So much fun!

Cuff Bracelet Prototypes
Cuff Bracelet Prototypes