When matting artwork, it’s common to have a lot of mat board scraps left over. I had a number of scraps that were large enough to make small open top storage boxes. If you would like to make one similar, here is how I did it.
You will need:
5 square mat board pieces of equal size
An assortment of collage papers
An assortment of tools for decorating paper – I used stencils, rubber stamps, paint, printmaking ink, markers and colored pencils
Clean scrap paper
Bone folder or Squeegee multipurpose tool
Old credit card or your favorite glue-spreading tool
Tim Holtz Idea-ology Metal Box Corners – they come in a package of 8 and you’ll need 4 corners per box
Chunk of old wood
Metal corner braces
Old belts or strips of leather or faux leather
First take your five mat board pieces and decorate both sides with collage papers combined with the paper embellishing techniques of your choice. Use water resistant inks because you’ll be applying acrylic medium over your collages later. Yes Paste is my favorite glue for sticking down large pieces of paper that have to look flat and free of wrinkles. I apply the glue with a credit card to get a nice thin layer then after laying down the paper piece I’m gluing I put a clean piece of scrap paper on top and burnish with a bone folder or Squeegee tool to get a tight, flat seal.
While working on this project at Perennial, another member asked me where I get my paper ephemera. The short answer to that question is that I’ve been collecting papers since the year I first got turned on to making collages – 1985! A more involved answer is to suggest some of the following sources of interesting papers:
- Old magazines and catalogs.
- Is someone you know doing some major cleaning? Offer to help in exchange for keeping interesting papers. This is a good way to get old graphic design samples, newspapers, books, maps, photos, negatives, stamps, envelopes, tickets – all kinds of neat stuff.
- Purchase some reproduction ephemera from a craft supplier.
- Save your art and paper craft “failures” and experiments. Whenever you have extra paint or ink, add a little more embellishment to your scraps until you get something you like. Toward the end of this article are examples of some great results I got using this method – Fun With Stencils.
- Check thrift stores, estate sales, garage sales, flea markets, etc.
- Shop a teachers resource recycling center like Leftovers, etc.
- Make your own with any paper technique that you like, or a combination of techniques, such as rubber stamping, stenciling, painting, printing, making paste paper, rubbings, handmade paper, computer printouts, cyanotypes or drawing.
- Use the decorative paper pads commonly sold for scrapbooking. There are designs for every taste and decorating style.
When you are satisfied with your designs, brush both sides of your mat board pieces with acrylic medium for durability and let dry.
Next start assembling your box from the bottom up, using the box corner hardware and the metal brads included in the package. Use a pencil to mark where the holes go and punch out the holes with an awl. An old chunk of wood is handy for protecting your work surface from the awl point. Be carful with the awl and aim it away from yourself while pressing down and through. Push brads through holes and spread the tines from the inside of the box to assemble the four bottom corners.
At this point the top four corners are loose and flapping so you’ll need something to stabilize them and keep your box shaped like a cube. At Perennial I rummaged through the spare hardware bins and found a couple of metal corner braces which worked wonderfully when attached with brass brads. There were only two available so I looked for something else for the other corners. You can buy metal corner braces at a hardware store and use them on all four top corners if you like.
At Perennial there is a box of old belts and belts have holes! Idea! I selected some to cut down and use on the other corners. Attached with brads, they work well with the “grunge” look of my boxes. If you lack old belts, you can use a variety of materials that can be cut into strips and have holes poked in it – plastic from old lids, scraps of faux leather, scraps of real leather, thin metal – what do you have lying around that you want to try?