Tag Archives: paper collage

Make St. Patrick’s Day Cards

St. Patrick's Day Cards
Everyone is Irish on St. Patrick’s Day! Wish good luck and celebrate spring by making St. Patrick’s Day Cards!

Supplies and Materials
Cardstock and a variety of decorative papers in shades of green
Downloadable templates “St. Patrick’s Day Card 1” and “St. Patrick’s Day Card 2”
Scoring tool
Tracing paper
Chipboard (can be scrap – for making templates)
Flower punch
Small circle punch
Paper flower embellishments
Eyelets
Eyelet setter
Metal ruler
Craft knife and blades (X-Acto or something similar)
Cutting mat
Pencil
Eraser
Rubber stamps (St. Patrick’s Day, appropriate greeting, Celtic designs, spirals)
Stamping ink pads and re-inkers in the following colors: dark brown, shades of green
Acrylic stamp mounting blocks
Double-sided tape
Paper cutter
Awl or needle tool
Small hole punch
Scissors
Decorative scissors
Glue stick
Masking tape
Hammer
Decorative brads
Optional – buttons, white craft glue such as Turbo Tacky Glue, needle, thread

The first part of the process for the pair of cards is to stamp out St. Patrick’s Day and Celtic motifs onto small pieces of scrap paper. Use stamping inks in various shades of green and dark brown. Mix in some neutrals if you want. You can make the backgrounds more interesting with the use of background stamps or techniques such as brayering.

Once you have a quantity of stamped pieces finished and the ink is dry, gather them together with some scraps of paper in various shades of green. Make a collage by gluing these scraps down with a glue stick onto a 1/2 sheet of white cardstock. You can create interest by cutting the scraps into smaller pieces by tearing while using a ruler as a straight edge or by cutting apart with decorative scissors. Burnish your collage periodically with a bone folder under a piece of clean scrap paper so the glue has a nice tight seal. Set aside for now and let the glue dry.

Collage made with scrap paper and paper pieces that I stamped with rubber stamps.
Collage made with scrap paper and paper pieces that I stamped with rubber stamps.

Directions for St. Patrick’s Day Card #1

St. Patrick's Day Greeting Card

1. Download and print out the template “St. Patrick’s Day Card #1”.

2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card. Score it  and fold it in half.

2. Trace the shamrock from the template onto the back of dark green decorative paper. Cut out the shamrock with scissors. If you want to make several cards, you can trace the shamrock onto chipboard and cut it out to use multiple times for tracing.

3. Trace the half-leaf shape onto chipboard and cut out. Trace onto four different pieces of decorative paper in different shades of green. Instead of pre-made decorative paper you can use some parts of your collage if you want (if you do this be sure to leave at least a 3 7/8″ x 5 1/8″ sized piece intact to use on card #2). Glue the half petals in place as shown on the card sketch in the PDF file.

4. Cut out a narrow strip (3/4″ wide) of light colored paper and stamp or glue a sentiment onto it. Glue this onto a slightly wider (1″ wide) paper strip. Glue to front of card and trim.

5. Glue the shamrock down in place on the front of the card.

6. Punch out a flower shape with a punch and glue down in center of shamrock.

7. Punch out a small circle and glue in place on the strip near the bottom of the card.

8. Punch two holes for eyelets in the center of where the two flower embellishments will go. You can use a small hole punch or a needle tool or awl to start the hole. If the hole is not large enough to accept the eyelet you can enlarge the hole with paintbrush handle or other handy tool.

9. Push the eyelets through the holes and set with the eyelet setter.

Variation – use buttons as embellishments instead of the paper flowers. Attach by gluing with white craft glue then further secure by sewing.

Directions for St. Patrick’s Day Card #2

St. Patrick's Day Greeting Card

1. Download and print out the template “St. Patrick’s Day Card #2”.

2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card, score it, and fold it in half.

3. Cut out a 3.75 x 5″ size piece of dark green cardstock.

4. Trace the shamrock from the template onto the back of the dark green cardstock. Cut out the shamrock with a craft knife. If you cut carefully, you can use the cutout to make another card. If you want to make several cards, you can save your first cutout and use it multiple times for tracing.

5. Get your collage out and cut a 3 7/8″ x 5 1/8″ size piece out of it. Position your dark green cutout piece over it and place those on top of your folded cardstock card base. Make sure the three layers line up correctly. If you decide you want a sentiment or other embellishment in the lower left area where there is some space, now would be a good time to add it.

6. Using the printed out template as a guide, poke holes in all three layers with an awl or needle tool.

7. Push decorative brads through the holes and spread prongs on the back side. You’re done!

Some of the rubber stamps and papers I used in this project are by 7gypsies by Canvas Corp Brands and Inkadinkado. The “Good Luck” stamp is by Carolyn Hasenfratz Design and the celtic and spiral stamps are hand carved by me.

If you would like to make envelopes for these cards here is a template that will fit:
http://www.limegreennews.com/documents/templates/envelope_template_rectangular.pdf

Extra tip: If you have heart punches or stencils, you can make a three or four leaf clovers for yet more cards from three or four heart shapes!

See my Pinterest site and past lesson plans for ideas and craft projects.
https://www.pinterest.com/chasenfratz/
http://www.limegreennews.com/lessons.html

Making Greeting Cards From Scrap Papers

Do you have the patience for playing around with lots of fiddly paper bits? If so you might enjoy collecting paper scraps and making them into interesting greeting cards. I’ll show you how gluing small bits of paper to strips of scrap cardstock can give you exciting design options.

Tools and Supplies:
Self-healing cutting mat
Paper cutter
Rubber stamps with greetings and sentiments
Permanent black rubber stamping ink
Clean scrap paper
Bone folder
Glue sticks
Scissors
Metal ruler
Corner rounder
Old food lid to use as a palette
Rubber stamping ink in complementary colors
Rubber eraser with flat sides
Palette knife and/or old credit cards for spreading glue
Yes Paste

An assortment of recycled papers:here are some suggested sources
Gift wrap and tissue
Gift tags
Books
Calendars
Folders
Used postage stamps
Magazines and catalogs
Old greeting cards
Wallpaper samples
Paint sample cards
Attractive product packaging
Scrapbooking paper scraps
Scraps from your old projects
Paper company sample books and promos
Ephemera from travel – maps, brochures, tickets, etc.

I’ll show you two different card designs that you can make by collaging scraps of paper onto cardstock strips.

Make an assortment of collaged strips

1. Cut some strips from plain scrap cardstock that are 1/2 to 3/4 inches wide. Old folders are a good source of scrap cardstock weight paper.

Strips of scrap cardstock and paper scraps ready for gluing
Strips of scrap cardstock and paper scraps ready for gluing

2. Lay out a bunch of small paper scraps and glue them down in a row down each strip. You might choose papers at random or try to follow a planned color scheme. When glue is dry enough to handle, use a scissors to trim the strips from the back to make the edges even.

Gluing paper scraps onto the cardstock strips
Gluing paper scraps onto the cardstock strips

3. Choose a color of rubber stamping ink that will help unify your design and squirt a little of it onto an old food lid. Dip the edge of a flat-sided eraser in the ink and apply a line of ink to the edges of your collaged strips. This is a small step that makes a huge difference in the visual appeal of your finished piece.

The strip at the lower left is in the process of having scraps glued to it. The middle strip has been trimmed and the upper right strip has been stamped along the edge with rubber stamping ink.
The strip at the lower left is in the process of having scraps glued to it. The middle strip has been trimmed and the upper right strip has been stamped along the edge with rubber stamping ink.

Instructions to make card design #1:

1. Print a selection of sentiments with permanent rubber stamping ink on strips of light colored paper to use on the card that you make. Select one to use as the main theme of your card.

Rubber stamped sentiments on strips of scrap paper.
Rubber stamped sentiments on strips of scrap paper.

2. Choose a piece of scrap cardstock or heavy paper to use for the base of your card. Fold it in half. Measure the front of your card.

3. Next select a piece of thin scrap paper that would make a good background for the front of the card. Tear out a piece that is 1/2 inch smaller than the front of your card, using the metal ruler as a tearing aid.

For example, if you fold an 8 1/2 x 5 1/2 inch piece of paper in half, the front of the card will measure 4 1/4 x 5 1/2 inches and the background paper for the front of the card should be 3 3/4 x 5 inches.

4. Next choose a simple shape to put on the front of the card – you could trace around a found object, use a cookie cutter or a stencil as a source. Trace one copy of this shape onto plain scrap cardstock. Make another tracing on the back of a piece of paper that harmonizes with the chosen colors for your card.

5. Cut out both shapes with scissors. Set aside the one in the harmonious color to glue to your card later.

6. Take the shape on plain cardstock and glue your sentiment across the middle or wherever looks best. Just below the sentiment, glue a section of one of your collaged and inked strips from earlier.

7. Moving from the inside to the edges, glue strips of scrap paper in complementary colors on either side of your sentiment and collaged strip for a striped effect. Cut around the base shape to trim when all covered.

8. Using the glue stick glue the colored shape you cut out earlier to the front of the card.

9. You will probably need some more robust glue to hold the collaged and inked shape since all the layers of paper will have made it pretty thick. Use Yes Paste to attach the striped shape to the front of the card. Trim if needed.

10. If needed, glue plain light colored scrap paper to the inside of the card to make a clean area for writing a message.

Instructions to make card design #2:

This second card design is designed to made from a piece of 4 1/4 inch by 8 1/2 inch cardstock.

1. Fold the cardstock in half and the front of the card will end up as a 4 1/4 x 4 1/4 square.

2. Cut a 3 3/4 by 3 3/4 inch square from plain scrap cardstock.

3. Glue a sentiment, a collged and inked strip and scrap paper strips to the cardstock square.

4. Trim around the square and round the corners with a corner rounding tool.

5. Glue the trimmed square to the front of the card with Yes Paste.

Extra Tips and Techniques for working with paper:
Cover up unwanted parts of found papers by laminating with other paper.
You can get wrinkles out of paper by ironing.
How does one glue down delicate tissue paper? Stabilize by gluing to a stiffer piece of paper with a glue stick and smooth out wrinkles with a bone folder.
When working on other projects, if you have leftover paint or ink use it up on plain paper scraps. Save these scraps and add to them whenever you have leftover art media. In time, you will have a lot of interesting scraps to work with.
If your paper project warps or curls, press it between heavy books with clean scrap paper around it to protect both card and books.

Embellishments that can be recycled and used on cards:
Buttons
Thread, string and yarn
Ribbon and trim
Fabric scraps
Wire
Beads and charms
Game pieces

Why I Send New Year Cards Instead of Christmas Cards

horizontal_strip_all_four_web

For about 10 years I have sent cards to celebrate the New Year instead of Christmas. Why do I do this?

One reason is that I like to design my own cards, and everyone on my list does not celebrate Christmas, so a New Year card saves me from having to design multiple cards and remembering who celebrates Christmas and who does not. Another reason is that it’s different, and I never mind being different. Still another is that I make a lot of my own Christmas gifts and it’s difficult getting the gifts AND cards done all at one time.

But the main reason is that the act of designing the cards reminds me of one of the best Christmas/New Year holiday seasons of my entire life and by making the cards I can have a private celebration of that memory to give me hope for the year to come. I was still in college and I had recently completed one of those design class projects where you are assigned to depict the four seasons in an abstract manner. We did one set with paint, and another with collage papers. I was really enthusiastic about the project because I love to work abstract and I especially enjoyed the collage part.

I was still fired up about collages when Christmas break of 1988 came around and I didn’t want to stop doing them. During the break between Christmas and New Year I had some rare time off from both work and school and I was able to work on some projects just because I wanted to do them. My uncle had given me a new Devo tape (one of my favorite groups of the 80s) for a Christmas gift and I listened to that over and over while I worked on several collages that I was really pleased with. I thought they were the best work I had ever done up to that point and I used ideas I developed during those few days for spinoff projects for some time to come. One of the pieces was a collection of “thumbnail” collages in a Mid-Century modern style that I still keep in my studio and still periodically get ideas from. I will never forget what that burst of creativity was like, it’s hard to describe but I felt fully alive and purposeful for one of the first times in my life. It’s a feeling I’m always working to recapture and I do succeed from time to time but it is not easy to get “in the zone” like that.

For this year’s design I decided to do a four seasons treatment, using collage in a sort of DADA/Constructivist style. Those kinds of pieces are typically either chilling, disturbing or both so I watered down the type if imagery I’d normally use for that type of collage because I wanted to convey a positive feeling about the New Year! I used my collage paper collection that I’ve been building up since 1985 and mostly let the colors carry the message. I did a little bit of editing with the computer after scanning the collages to finish  them off and size them for cards. Each card recipient is going to get one of the four seasons at random this time, instead of everyone on the list getting the same card. I wish everyone a creative New Year in 2015!

If you want to see what handmade greeting cards I have for sale, go to http://carolynsstampstore.com/catalog/handmade-carolyn-c-47.html