Tag Archives: stencils

Experimenting with my new stencils

Four Mid-Century Modern inspired compositions
Four Mid-Century Modern inspired compositions

Over the last couple of weeks I designed and cut a number of stencils in a Mid-Century Modern style that I plan to use in home decor and in art projects. While on a Modern STL house tour this past weekend, I noticed that several of the homes featured color schemes that go well with the theme to my blog, which was intended to be temporary. Inspired by the recent tour, I decided to use my new stencils to create a header graphic for this site and only modify a few parts of the theme as I see fit.

First I took my new stencils and sponged black rubber stamping ink through them onto white paper. I scanned these designs and brought them into Photoshop where I colorized them and added other digitized textures to create the four compositions above. Then I selected sections of these designs to make my new header graphic. I’m excited about possibly using these as studies for art pieces I may want to do someday.

To learn how to cut your own stencils, see my article Fun With Stencils.

To learn how to use scanned textures in Photoshop artwork, see my article Analog to Digital: Waste Paper From Stamping Projects Can Enhance Photoshop Art.

Make a Soft Dia De Los Muertos Skull

Soft Dia De Los Muertos Skull made using discharge paste, embroidery, fabric paint, and embellishments
Soft Dia De Los Muertos Skull made using discharge paste, embroidery, fabric paint, and embellishments

Do you want to have some fun with a mixed-media fabric project? This soft Dia De Los Muertos skull uses discharge paste, fabric paint, embroidery and embellishments – you can use a lot of your toys for this one! Enhance your decor with a small decorative throw pillow or attach a loop to the back and hang it on the wall.

This tutorial assumes you know the basics of cutting stencils and stenciling on fabric. If you need more of an introduction to those skills, see my tutorial “Fun With Stencils”. You’ll need a few very basic sewing and embroidery skills too.

Read more at the Jacquard Products web site

Filmstrip Challenge

Artwork after scanning and adding a digital layer that resembles filmstrips.
Artwork after scanning and adding a digital layer that resembles filmstrips.

I had so much fun participating in a sketch challenge recently that I decided to make an effort to enter more. RubberStampMadness magazine is currently running a Filmstrip Challenge which appealed to me. Above is my entry. There are still a few days left before the deadline if you want to get in on the fun – here are the entry guidelines.

Though I’ve been rubber stamping for well over 20 years, I haven’t done a whole lot of coloring in of rubber stamps. This project helped me to get some practice and was an opportunity to experiment with mixed media.

The first thing I did was to cut out a bunch of 2 x 2 inch and 2 x 3 inch pieces of scrap paper which would become the individual “frames” in the finished artwork. Then I stamped images on them in black waterproof ink.

The next step was to give each section it’s own background color with decorative chalks and old eyeshadow. To apply I used Q-tips, sponge tip makeup applicators and Fantastix by Tsukineko which are a great help in getting color into  tight areas around the edges of the stamped images.

Next I sprayed the paper pieces with workable spray fixative to hold the chalk in place, then I coated them with a thin layer of matte medium and let it dry. The workable fixative allowed me to brush on matte medium without the powders smearing and the purpose of the matte medium is twofold – it’s the glue I will use to attach the images and words I cut from magazines, and it keeps the markers I’ll apply later from smearing the black ink that I stamped.

The next step was to figure out words to put in the word and thought balloons I had stamped. It would be a lot of fun to tell a coherent, planned out story with this format but I couldn’t think of any ideas for a story so I did what I often do, I relied on the random and let my subconscious guide me. Cutting out pictures from magazines has been a reliable way for me to tap into the subconscious part of my brain for decades. I picked up some discarded magazines that I hadn’t cut up yet and went through them looking for words that piqued my interest. Along the way I cut out appealing pictures – some I put aside to use in other projects and a few I used for this one. I grouped the words on my work surface into combinations that appealed to me and matched the words or groups of words with images. Some of the results make sense to me, some don’t and it’s likely the ones that mean something to me won’t mean the same thing to others and vice versa. That’s one of the fun things about art!

I then glued the cut-out images and words in place by brushing the backs of them with matte medium and smoothing them in place with an old credit card. One way to reduce the risk of wrinkling the paper is to coat both sides of the pieces with matte medium and let dry before wetting the backs again to apply. It’s extra work but it’s worth it for good results. You can speed up drying with a heat tool so your work session isn’t interrupted. (It sounds funny to say “work session” – this was play!)

If you prefer instead of gluing in cut-out words you can write words in the balloons or use word rubber stamps or stickers.

My next step was to take each section and highlight the stamped images with a little color here and there and add some texture to the backgrounds with stencils from The Crafter’s Workshop. I like the way some of the textures vaguely suggest the “dot gain” effect that you often see in comic books. My coloring implements for this project were Sharpie markers and Prismacolor pencils. Both will color just fine over the matte medium but if you want to use different media, do some tests on scrap paper first to see if the surface will accept the color. I could have made masks to protect the areas I did not want to stencil on but to save work I relied on my eye to tell me where to stop. I only went onto the white word areas on a couple of spots so I decided to touch up these areas later with acrylic paint to disguise my mistakes. If you decide to sponge ink through the stencils you will need to make masks.

I glued the individual “frame” pieces down on a piece of archival cardstock with Yes Glue. Then I got out a tiny paintbrush and touched up the white areas and I liked the way the bright white looked so I added white highlights here and there all over the artwork where I thought it needed it. I liked the effect, it added a little extra “pop”.

The next image shows what my artwork looked like before I scanned it and added digital enhancements.

Here is my artwork before I added any digital enhancements.
Here is my artwork before I added any digital enhancements.

Stamp credits:

Row 1, left to right: Unknown, Carolyn’s Stamp Store, Unknown, All Night Media, Carolyn’s Stamp Store

Row 2: Viva LasVegasStamps, Carolyn’s Stamp Store, Unknown

Row 3: Viva LasVegasStamps, Viva LasVegasStamps, Carolyn’s Stamp Store, 7gypsies

Row 4: Unknown, Carolyn’s Stamp Store, Chronicle Books, All Night Media

Row 5: Viva LasVegaStamps, Carolyn’s Stamp Store, Carolyn’s Stamp Store, Carolyn’s Stamp Store

After scanning in the image, I opened it up in Photoshop and added a layer for a faux filmstrip effect which I made from a couple of these free digistamps. I may print out this “filmstrip” layer on clear transparency film and mount it over the original artwork with brads or eyelets to display it.

A Road Trip Journal for Dad – Part 1

In June of this year I took a trip with my Dad to Toronto and New York City. I knew ahead of time that we would be traveling on Father’s Day, so I made a gift to present to him on the trip – a handmade journal for him to write in each day, which he did. The journal was designed so that after the trip we could add photos and ephemera and perhaps write more about our memories. I’m in the process of getting both of our photos printed so we can start working on it. I expect this will be a long term project and we will enjoy the time together that we spend on it and memories of the great trip we had. Below are photos of some of my favorite parts of the journal, as they looked before any content was added. In the future I’ll be sharing some our favorite layouts as we get them done.

Cover of journal
Here is the front cover of the journal. It’s decorated with a collage that is protected by a piece of acetate. The small word rubber stamps are from Carolyn’s Stamp Store.
Inside front cover and first page
Inside front cover and first page. The inside front cover has a pocket for holding ephemera. The large rubber stamp on the right is from 7gypsies.
Set of two interior pages
On the left I used a trimmed Project Life card, part of the collage I made and some decorative paper. The small rubber stamps on the right are from Carolyn’s Stamp Store.
Set of two interior pages
On the left I used two different stencils from Crafter’s Workshop and a stamp from 7gypsies.
Set of two interior pages
On the left I used a Project Life card, part of my collage and decorative paper. On the right are stamps from Carolyn’s Stamp Store.
Set of two interior pages
On the right I used a stencil from Crafter’s Workshop and some decorative papers.
Set of two interior pages
On the right in addition to decorative papers I used a sticker from Tim Holtz and a Project Life card.

Here are some links to products I used to make this journal:

Months of the Year Unmounted

Year Numbers 2 Unmounted

Evocative Words II

Set of Unmounted Stamps – Journaling and Planner Words

7gypsies Medium Binding Rings Antique Brass

Tim Holtz Idea-ology Long Fasteners

Mini Road Sign 6×6 Stencil

Mini Sketch Grid 6×6 Stencil

Mini Woodgrain 6×6 Stencil